Interfaces

EA Incremental Encoder Adapter

• Single-ended driver or differential driver/receiver available
• Three digital channels (A/B/I encoder signals) per adapter
• Variety of connector options

More EA Details

LS7082N Encoder to Counter Interface Chip

• x1, x2, and x4 mode selection
• Index input
• TTL and CMOS compatible
• Low current (micro-amps) ...

More LS7082N Details

LS7082N-S Encoder to Counter Interface Chip

• x1, x2, and x4 mode selection
• Index input
• TTL and CMOS compatible
• Low current (micro-amps) ...

More LS7082N-S Details

LS7083N Encoder to Counter Interface Chip

• x1 or x4 resolution multiplication
• TTL and CMOS compatible
• Low current (micro-amps)
• 8-pin DIP package ...

More LS7083N Details

LS7083N-S Encoder to Counter Interface Chip

The LSI Computer Systems IC allows incremental shaft encoders to drive standard up/down counters. Connect the encoder quadrature outputs to the A and B inputs. The LS7083N-S...

More LS7083N-S Details

LS7084N Encoder to Counter Interface Chip

• x1 or x4 resolution multiplication
• TTL and CMOS compatible
• Low current (micro-amps)
• 8-pin DIP package ...

More LS7084N Details

LS7084N-S Encoder to Counter Interface Chip

• x1 or x4 resolution multiplication
• TTL and CMOS compatible
• Low current (micro-amps)
• 8-pin SOIC package ...

More LS7084N-S Details

LS7166A 24-BIT Quadrature Counter

The LSI Computer Systems LS7166A is a CMOS, 24-bit counter which you can program to operate in several functional modes. The operating modes are set up by writing...

More LS7166A Details

LS7166A-S 24-BIT Quadrature Counter

• Programmable count modes
• DC to 40MHz count frequency
• 8-bit I/O bus for μP communication and control
• 24-bit comparator for pre-set count comparison ...

More LS7166A-S Details

LS7183N Encoder to Counter Interface Chip

• x1, x2 or x4 resolution multiplication
• TTL and CMOS compatible
• Low current (micro-amps)
• 8-pin DIP package ...

More LS7183N Details

LS7183N-S Encoder to Counter Interface Chip

• x1, x2 or x4 resolution multiplication
• TTL and CMOS compatible
• Low current (micro-amps)
• 8-pin SOIC package ...

More LS7183N-S Details

LS7184N Encoder to Counter Interface Chip

• x1, x2 or x4 resolution multiplication
• TTL and CMOS compatible
• Low current (micro-amps)
• 8-pin DIP package ...

More LS7184N Details

LS7184N-S Encoder to Counter Interface Chip

• x1, x2 or x4 resolution multiplication
• TTL and CMOS compatible
• Low current (micro-amps)
• 8-pin SOIC package ...

More LS7184N-S Details

LS7267 24-BIT DUAL-AXIS Quadrature Counter

• Dual 24-bit counters to support X and Y axes in motion control applications
• Dual 24-bit comparators
• Digital filtering of input quadrature clocks
• Programmable 8-bit separate filter clock prescalers ...

More LS7267 Details

LS7267-S 24-BIT DUAL-AXIS Quadrature Counter

• Dual 24-bit counters to support X and Y axes in motion control applications
• Dual 24-bit comparators
• Digital filtering of input quadrature clocks
• Programmable 8-bit separate filter clock prescalers ...

More LS7267-S Details

LS7366R-S 32-Bit Quadrature Counter with Serial Interface

• Operating voltage: 3V to 5.5V (VDD - VSS)
• 5V count frequency: 40MHz
• 3V count frequency: 20MHz
• 32-bit programmable counter ...

More LS7366R-S Details

PC3 Encoder Open Collector Cable Driver

The PC3 provides single-ended, open collector outputs and includes a switching power regulator that accepts a power supply from 9.5 to 32 volts. The PC3 is intended for...

More PC3 Details

PC4 Incremental Encoder Cable Driver

The PC4 is a small, plug-in RS-422 cable driver board that drives long cables up to one thousand feet using differential signaling to improve noise immunity. The PC4 can be...

More PC4 Details

PC5 Broadcom/Avago Compatible Incremental Encoder Cable Driver

• Broadcom/Avago HEDL compatible output

More PC5 Details

PC6 Encoder to Counter Interface Board

The PC6 decodes the quadrature outputs of an incremental shaft encoder to drive standard up/down counters. The PC6-U, up count / down count version, can be connected to the...

More PC6 Details

QSB Quadrature to USB Adapter

• Low-cost, easy-to-use USB (Type A) adapter
• QSB-S and QSB-D designed for basic testing of incremental, PWM and analog encoders without use of an oscilloscope
• Reads quadrature count rate up to 6 MHz
• USB port provides power for adapter and connected encoder ...

More QSB Details

SEI-USB SEI to USB Adapter

• USB 1.1 device communicates at 12 Mbit/sec
• Compatible with USB 2.0 hubs and host adapters
• Supports up to 15 total devices on the SEI bus
• Supports SEI bus lengths up to 1,000 feet, depending on the number of devices attached. ...

More SEI-USB Details

USB4 Encoder Data Acquisition USB Device

• Real-time tracking of up to 4 incremental encoders with or without index (up to 5 MHz encoder input frequency)
• 4 channel pulse width, pulse period and RPM measurement
• Available with single-ended or differential encoder inputs, optional DIN rail mounting
• 8 digital outputs, 8 digital inputs, 4 A/D inputs , 4 D/A outputs ...

More USB4 Details