S1 Rotary Shaft Encoder

S1 Webproduct 01 Product Photo

S1 Features

  • Shafted rotary encoder
  • 26 Resolutions from 32-5,000 CPR (128-20,000 PPR)
  • Two shaft sizes: 6 mm , 1/4 in.
  • Three torque options
  • 2 channel quadrature TTL square wave output
  • Optional Index channel
  • High-retention connector/cable (sold separately)

See more info below

Configure the S1

US Digital S1 Rotary Shaft Encoder Description

Restriction of Hazardous Substances

The S1 optical shaft encoder converts shaft position or speed into a quadrature output signal. This rotary encoder delivers up to 20,000 PPR resolution in a glass-filled polymer housing. Available in two shaft sizes: 6 mm, 1/4 in.

US Digital offers three different torque options for various uses: 

  • Default (-D): sleeve bushing with higher damping for human interface applications.
  • Ball bearing (-B): miniature precision ball bearings suitable for high-speed applications.
  • Light static drag (-N): sleeve bushing with lower damping for low-speed applications.

The S1 rotary encoder is designed to drive cables up to 10 feet long. For longer cable lengths, we recommend using the model S5 and selecting the differential output. Another option is to add a PC4/PC5 differential line driver to this encoder. 

This incremental encoder is designed for use with a high-retention connector. After you make your selections in the Product Configurator, compatible cables and connectors will be displayed below and must be ordered separately.

 

Product Specifications

ENVIRONMENTAL

PARAMETER VALUE UNITS
Operating Temperature, CPR < 2000 -40 to 100 C
Operating Temperature, CPR ≥ 2000 -25 to 100 C
Electrostatic Discharge, IEC 61000-4-2 ± 4 kV
Vibration (10Hz to 2kHz, sinusoidal) 20 G
Shock (6 milliseconds, half-sine) 75 G

MECHANICAL

PARAMETER SLEEVE BUSHING BALL BEARING
Max. Acceleration 250000 rad/sec² 250000 rad/sec²
Max. Shaft Speed (mechanical) 100 rpm (1) 10000 rpm (1)
Max. Shaft Torque 0.5 in-oz (D-option)
0.3 in-oz (N-option)		 0.05 in-oz (B-option)
Max. Shaft Loading 2 lbs. dynamic
20 lbs. static		 1 lb.
Bearing Life > 1000000 revolutions L10 = (19.3/Fr)³ *
Where L10 = bearing life in millions of revs, and
Fr = radial shaft loading in pounds
Weight 0.70 oz. 0.70 oz.
Max. Shaft Runout 0.0015 in. T.I.R. 0.0015 in. T.I.R.
Max. Panel Nut Tightening Torque 20 in-lbs 20 in-lbs
Technical Bulletin TB1001 - Shaft and Bore Tolerances Download

* only valid with negligible axial shaft loading.

(1) The maximum speed due to electrical considerations is dependent on the CPR. See the EM1 or EM2 product pages.

PHASE RELATIONSHIP

B leads A for clockwise shaft rotation, and A leads B for counterclockwise rotation when viewed from the shaft side of the encoder.

ELECTRICAL

  • Specifications apply over the entire operating temperature range.
  • Typical values are specified at Vcc = 5.0Vdc and 25°C.
  • For complete details, see the EM1 or EM2 product pages.
PARAMETER MIN. TYP. MAX. UNITS CONDITIONS
Supply Voltage 4.5  5.0 5.5 V  
Supply Current   27 33 mA CPR < 500, no load 
  54 62 mA CPR ≥ 500 and < 2000, no load
  72 85 mA CPR ≥ 2000, no load
Low-level Output     0.5 V IOL = 8mA max., CPR < 2000
    0.5 V IOL = 5mA max., CPR ≥ 2000
  0.25   V no load, CPR ≥ 2000
High-level Output 2.0     V IOH = -8mA max. and CPR < 2000
2.0     V IOH = -5mA max. and CPR ≥ 2000
  4.8   V no load and CPR < 2000
  3.5   V no load and CPR ≥ 2000
Output Current Per Channel -8   8 mA CPR < 2000
-5   5 mA CPR ≥ 2000
Output Rise Time   110   nS CPR < 2000
  50   nS CPR ≥ 2000, ± 5mA load
Output Fall Time   100   nS CPR < 2000
  50   nS CPR ≥ 2000, ± 5mA load

PIN-OUT

PIN DESCRIPTION
1 Ground
2 Index
3 A channel
4 +5VDC power
5 B channel

Note: 5-pin single ended mating connector is CON-C5 or CON-LC5

PRODUCT CHANGE NOTIFICATIONS

Title Date Description Download
Laser Marking - PCN 5253 6/17/2015 As part of our ongoing continuous improvement efforts, US Digital is changing the labeling/marking method for our E3, E6, H3, H6, S1, S2 and S6 products. Download
EM1 & EM2 Update - PCN 4199 1/14/2014 Based on our continuous process improvement program, US Digital is changing the current marking method for our EM1 and EM2 encoder modules to a serialization method. This change will allow for each module to have a unique code; the current marking method is based on a date code system that includes all encoder modules produced within a specific week / year. The serialization system will be based on a hexadecimal system. Download
EOL Sealed Housing Option - PCN 1021 4/11/2013 This PCN is a formal notification that US Digital is discontinuing the Sealed Housing option for the following products:
  • A2 Absolute Optical Encoder
  • A2T Absolute Optical Inclinometer
  • H1 Ball Bearing Optical Shaft Encoder
  • H3 Ball Bearing Optical Shaft Encoder
  • S1 Optical Shaft Encoder
  • S2 Optical Kit Encoder
The Sealed Housing option provides the encoder with low level capability of surviving in moisture environments, however the encoder is NOT waterproof or intended to be used in applications where this is required.		 Download
EM1 LED Die - PCN 1016 2/7/2013 As part of US Digital's continual assurance of supply strategy, we have qualified additional sources for our LED die used in our EM1 encoder module, which in turn impacts all of the following products:

EM1, E2, E3, E5, E6, H1, H15, H3, H5, H6, HB5M, HB6M, HD25, PE, S1, S2, S5, S6, T5 and T6

The device specification will remain the same, i.e. there will be no change to form, fit or function of the product(s) as specified by US Digital. The appropriate quality and reliability testing has been performed on representative products to ensure normal parametric distribution, consistent with US Digital's quality and reliability standards.		 Download

Additional Information

Product Notes

  • Cables and connectors are not included and must be ordered separately.
  • For ordering information please see the Compatible Cables / Connectors section above.
  • US Digital® warrants its products against defects in materials and workmanship for two years. See complete warranty for details.

Datasheets

Related

3D Model Downloads

Please configure your product first to download a 3D model.
(Note: The formats below will become links if there are 3D models available.)

    • SolidWorks Format
    • IGES Format
    • Parasolid Format
    • STEP Format

    Product Configurator

    TO VIEW PRICING CHOOSE EITHER OPTION 1 OR 2 BELOW.

    Questions? Contact our support team.

    Option 1: Enter the Product Part Number

    Already have your part number (e.g., E5-5000-394-IE-S-D-D-3)? Enter it in the following field.

    Option 2: Build your Product

    Customize your product step-by-step. Need help? Our support team is here to help.

    We recommend enabling Javascript when using the product configurator.

    To request a quote or purchase, call or email us with the part number(s) or PDF(s) of your configured part(s)—we will respond promptly.

    Important: Include the contact information requested in the PDF(s) to avoid delays.

    Feedback

    US Digital's mission is a commitment to quality and constant improvement. If you find an error to a product on this page, please let us know!

    Compare Items (Max 3):