HUBDISK-2 2 in. Transmissive Rotary Disk
HUBDISK-2 Product Description
US Digital offers a wide variety of standard HubDisk assemblies (optical encoder disk attached to an aluminum hub) to aid with mounting on to a shaft. Encoder disks may also be ordered as a stand alone item. The rotary encoder disks are made from 0.007" thick Mylar polyester film and the material allows for a -40C to 100C temperature range. The disk on the HubDisk assembly comes attached with the emulsion side up when the disk text is correct reading.
HUBDISK-2 consists of a precision machined aluminum hub fastened to a 2" diameter optical encoder disk (DISK-2). One or two set screws (depending on the hub's bore size) are used to fasten the hub to a shaft. The HubDisk assembly is available with bore sizes ranging from 2 mm to 1 inch. All HubDisk assembly bores are held to a very tight tolerance defined by US Digital Technical Bulletin Shaft and Bore Tolerances TB1001.
View here or download the specifications
|Temperature Range||-40C to 100C|
|Hub Set Screw Torque||2-3 in-lbs|
|Outside Disk Diameter (OD)||2" ± 0.010 in.|
|Bore Diameter Tolerance||See Technical Bulletin TB1001|
Product Change Notifications
|2" Hub/Disk Assembly Screw Change - PCN 6644||9/27/2018||As part of our ongoing continuous improvement efforts, the screws used in the assembly of the 2" hub/disk assembly, that is with a bore of 12mm and larger, will be changed from a black oxide to a zinc plated screw.
The zinc plating improves corrosion resistance as well as alleviates any potential for oil residue.
The plating change has no effect on form, fit or function of our hubdisk assembly.
|Hub Set Screw Production Change - PCN 5367||7/20/2015||As part of our ongoing continuous improvement efforts, US Digital is implementing a change related to the production of our 5/16" (.313), 8mm (.315), 3/8" (.375), and 10mm (.394) HUBDISK assemblies. We are adding a low strength threadlocker to the set screw during our assembly process to assist in securing the set screw in the hub during transportation. This will aid in the set screw retention of these specific hub sizes; ensuring the retention is sufficient and avoid the potential of them backing out of the hub assembly during transit. This change does not affect form, fit or function.||Download|
- US Digital® warrants its products against defects in materials and workmanship for two years. See complete warranty for details.
3D Model Downloads
Please configure your product first to download a 3D model.
(Note: The formats below will become links if there are 3D models available.)
- SolidWorks format
- IGES format
- Parasolid format
Related Products & Accessories
The following are related products for the HUBDISK-2
US Digital's mission is a commitment to quality and constant improvement. If you find an error to a product on this page, please let us know!