CUI Inc. Compatibility AMT10X

AMT102, AMT102E, AMT103, AMT103E.

Part Number Comparison

CUI Inc. Part Number
AMT10 x - xxxx - x xxxx - x
US Digital Part Number
E5- xxxx - xxx - x - x - H - x - B
Outputs/Connector
Description CUI Inc. US Digital
Single-ended A, B, (Index)/5-pin radial 2 5
Single-ended A, B, (Index)/5-pin axial 3 N/A
Differential A+, A-, B+, B- (Index +, Index -)/10-pin radial 2E D
Differential A+, A-, B+, B- (Index +, Index -)/10-pin axial 3E N/A
Resolution (CPR)
CUI Inc. US Digital
2048 2048 (see E6 encoder)
1024 1024
1000 1000
800 N/A
512 512
500 500
400 400
384 384
256 256
250 250
200 200
192 192
125 125 (see E4 or E4P encoders)
100 100
96 96
48 N/A
Index Pulse Output
Description CUI Inc. US Digital
No N NE
Yes I IE
Shaft Diameter
Description CUI Inc. US Digital
2mm 2000 079
3mm 3000 118
1/8" 3175 125
4mm 4000 157
3/16" 4760 188
5mm 5000 197
6mm 6000 236
1/4" 6350 250
8mm 8000 315
Mounting Type
Description CUI Inc. US Digital
Standard Base* S D
Wide Base** W G

* US Digital "D" base has 2 mounting holes on a 0.750" dia. B.C., and 3 holes on a 0.823" dia. B.C.. CUI Inc. standard base has the same mounting holes in its standard base, but also has additional mounting holes not found on the US Digital base.

** US Digital G-option base has 2 mounting holes on a 1.812" dia. B.C.. CUI Inc. wide base has two mounting holes on a 1.812" dia. B.C., but also has two mounting holes on a 1.277" dia. B.C. that are not included on US Digital G-option base.

Latest in Compatibility Guides