The AD2B is no longer available for purchase.

AD2B SEI to RS-232 Adapter (9-pin)

1 / 3
  • AD2B
  • AD2B
  • AD2B

Overview

The AD2B adapter allows the RS-485-like signal of SEI devices to interface to a standard RS-232 port (9-pin DB), such as those in IBM compatible PCs. The SEI (Serial Encoder Interface) bus is a...

Read more

Product Specifications

Specifications apply over entire operating temperature range.

ParameterMin.Typ.Max.UnitsNotes
Supply Voltage 8.0 - 16 Volts -
Supply Current (without encoders) - - 15 mA -
Differential SEI Output voltage
|DataL - DataH|, |Busy+ - Busy-|
2.0 2.75 5.0 Volts Load = 100Ω
Differential SEI Input Voltage
|DataL - DataH|, |Busy+ - Busy-|
0.2 - 5.0 Volts -
Common Mode SEI Output Voltage
(DataH + DataL)/2, (Busy- + Busy+)/2
2.0 2.5 3.0 Volts Load = 100Ω
Common Mode SEI Input Voltage
(DataH + DataL)/2, (Busy- + Busy+)/2
-4.5 - 3.0 Volts -
Input current
DataH, DataL, Busy-, Busy+
-15 - 15 mA In = 0 to 5V
RS-232 Output ±5.0 ±8.0 - Volts -
RS-232 Input ±3.5 - ±15 Volts -
RS-232 Input Resistance 3 5 7 -
ParameterMin.Max.Units
Storage Temperature -40 100 C
Operating Temperature 0 70 C
Humidity (non-condensing) 0 95 %

MOD6:

PinNameDescription
1 GND Ground, common for power, data and busy pairs.
2 Busy+ Differential input line, active high, has 330 Ω pull down.
3 Busy- Differential input line, active low, has 330 Ω pull up.
4 PWR Power supply output to encoder bus.
5 DataL Bidirectional differential data line, has 330 Ω pull up.
6 DataH Bidirectional differential data line, has 330 Ω pull down.

DB9F:

PinNameDescription
3 RXD Data input from host, normally low.
2 TXD Data output to host, normally low.
7 RTS Not connected.
8 CTS Busy line to host, active low.
5 GND Ground, common for RS232 signals.
6-pin Modular
CablesDescription
CA-MD6-SH-MD6-x   Modular connectors on both ends of a shielded cable
CA-MD6-SS-MD6-x           Modular connectors on both ends of a silver satin cable
ConnectorsDescription
CON-MD6-2J Two-way 6 conductor modular connectors
CON-MD6-3J Three-way 6 conductor modular connectors
Attention:
  • The cables supplied for the SEI bus by US Digital are wired straight through with no crossed wires.  Cables and splitters intended for telephone system usage are wired differenty and may damage your SEI device.
  • Specify cable length when ordering.

PS-12 Power supply

Software

 

Title Date Description Download
PCN 1011 9/21/2011 The AD2B, AD4B, AD7, EADAPT, EDAC2, EDIVIDE, EPOT, EQUAD, ESUM, ESWITCH, ETACH2, SEI-USB, USB-232 currently utilizes a printed thermal transfer label. This label will no longer be used and will be replaced by laser marking directly onto the housing of the product. The purpose for this change is to create a more durable solution, and eliminate the possibility of the label being inadvertently removed from the housing. Download
PCN 4242 3/4/2014 This PCN is a formal notification that US Digital is discontinuing the AD2B SEI to RS-232 Adapter. Download

Product Description

Restriction of Hazardous Substances

The AD2B adapter allows the RS-485-like signal of SEI devices to interface to a standard RS-232 port (9-pin DB), such as those in IBM compatible PCs. The SEI (Serial Encoder Interface) bus is a simple, quick and convenient network of SEI devices interfacing to a RS-232 serial port. The SEI bus supports from 1 to 15 devices on a single 6-wire telephone-type cable, up to 1000 feet long. For more information on the SEI bus please see the SEI page. 

The AD2B has 2 differential signals to interface to SEI devices: the bidirectional data pair for communication, and the busy input pair for data flow control. The PS-12 power supply connects to the AD2B and furnishes power for all SEI devices on the bus.  

Product Notes
  • US Digital warrants its products against defects in materials and workmanship for two years. See complete warranty for details.

Cable/connector assembly not included and must be ordered separately.

Related Products & Accessories

Purchasing

This product is no longer configurable or available for new applications.