US Digital will be closed for the holidays and unable to take orders Wednesday, December 24th through Friday, January 2nd. Learn more »

US Digital

EDIVIDE Encoder Resolution Divider

Overview

  • Divides resolution by any number between 1 and 4096
  • Produces 90 deg. quadrature with 50% duty cycle
  • Low cost solution for custom resolutions
  • Tracks encoder position in real-time from DC to 1 MHz
  • Positive finger-latching connectors
  • Optional DIN rail mount

The EDIVIDE divides the resolution of an optical incremental encoder by any integer number set by the DIP switch. The EDIVIDE draws its +5 V power from the encoder cable. It outputs quadrature codes with 50% symmetry and 90...

Read more

Product Specifications

ParameterMin.Typ.Max.Units
Supply Voltage (into EDIVIDE) 4.75 5.0 5.25 V
Supply Current (without encoders) - 120 - mA
Input Low Voltage 0 - 0.8 V
Input High Voltage 2.0 - Vcc V
Output Low (at 8mA current, sink) - - 0.4 V
Output High (at -4mA current, source) 2.4 - - V
Quadrature Input Frequency 0 - 1.0 MHz
Phase Delay (from input to output) - 500 - nSec
ParameterMin.Max.Units
Storage Temperature -40 100 C
Operating Temperature 0 70 C
Humidity (non-condensing) 0 95 %
Encoder Inputs (diode clamped) -0.6 5.6 V
PinDescription
1 Ground
2 Index
3 A channel
4 +5VDC power
5 B channel
  • 1 = divide by 1
  • 2 = divide by 2
  • 2+1 = divide by 3*
  • 128+32+1 = divide by 161*
  • 0 = divide by 4096

* DIP switches may be combined to create any possible CPR division.

Finger-latching
5-pinDescription
CON-FC5-22* Connector
CA-FC5-W4-NC-1 Connector on one end with 4 12" wires
CA-FC5-W5-NC-1 Connector on one end with 5 12" wires
CA-FC5-SH-NC-6 Connector on one end of a 6' shielded round cable
CA-FC5-SH-FC5-6 Connector on both ends of a 6' shielded round cable

* 22 AWG is standard. 24, 26 and 28 AWG are also available.

Product Description

The EDIVIDE divides the resolution of an optical incremental encoder by any integer number set by the DIP switch. The EDIVIDE draws its +5 V power from the encoder cable. It outputs quadrature codes with 50% symmetry and 90 deg. quadrature outputs. The index signal from the encoder is simply passed straight through from input to output with no change. It tracks bidirectional encoder inputs from DC to 1 MHz. DIN rail mounting is available.

Since incremental encoders are available with only limited resolution choices, the EDIVIDE greatly extends the possible choices. Set the DIP switch to the desired divisor in binary (i.e. to divide by 161, set the DIP switch to 128 + 32 + 1). It is best to cycle the power after any changes are made to the the DIP switch.

Product Notes
  • Cables and connectors are not included and must be ordered separately.
  • US Digital warrants its products against defects in materials and workmanship for two years. See complete warranty for details.
Related

Purchasing

Configure and Purchase

1. Mounting


Product Part Number
Quantity Price
1 $50.95
10 $41.90
50 $38.70
100 $36.75
Over 100 Call for quote
Quantity
Unit Price

$50.95

Subtotal

$50.95

For your convenience, use the above part number to order via phone 800.736.0194

Related Products & Accessories